Celestron COSMOS 3 MP LCD Handheld Digital Microscope COSMOS LCD Portable Micr - Page 4
Specifications, Getting Started
View all Celestron COSMOS 3 MP LCD Handheld Digital Microscope manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SPECIFICATIONS LCD Screen 2.4 inch /60 mm TFT 320 x 240 resolution Sensor Resolution / Interpolation 3MP CMOS Sensor 2048x1536 / digital up to 12MP Optical Power (Magnification) 1 to 3.7x and 54x with digital zoom up to 216x Illumination 6 White LEDs Digital Zoom 4x Internal Storage 128MB Flash Memory (3MP - est. 250 Snapshots & 5min. Video) SD Cards Supported Up to 16GB Field of View 26 mm @ 2x, 14 mm @ 3.7x, 2.5 mm @ 54x USB Cable 2.0 Image Format Snapshots: JPG - Video: AVI Power Requirements Weight / Dimensions 2AA Batteries (user supplied) 0.75W 6.6 oz (187 g) / 3.8" x 2.5" x 4.2" (96 x 63 x 107mm) Operating Temperature 0°C to 40°C (32° F to 104° F) GETTING STARTED BATTERY INSTALLATION To use your microscope install 2AA batteries which provides the power to operate it indoors or outdoors. Slide the battery cover on the bottom of the microscope (5) to open, and insert the batteries according to the battery polarity as shown. After the batteries are installed, close the battery cover. Battery condition will be shown in the top left of the LCD in viewing and video modes, and "Low Battery Condition" will be shown in red on the screen to notify you. NOTE: When not using the microscope, you will want to turn it off to preserve battery life. Typical battery life is 1.5 hours using 3 LEDs and 0.75 hours using all 6 LEDs. For most applications, 3 LEDs are all that are needed for proper illumination. Also, if the microscope will not be used for a few weeks or more, remove the batteries. 4 | ENGLISH