Cisco 16OC3/POS-SM Hardware Installation Guide - Page 141

WIC-1AM and WIC-2AM Features, Analog Modem WIC LEDs

Page 141 highlights

Analog Modem WAN Interface Cards Analog Modem WIC LEDs WIC-1AM and WIC-2AM Features The WIC-1AM and WIC-2AM interface cards support the following protocols: • All standard data rates from 300 bps to 33.6 kbps (V.34bis) • V.42bis and MNP 5 data compression • V.42, LAPM, and MNP 2 to 4 error correction • V.90 up to 56 kbps • MNP 10 for high performance under all line conditions • MNP 10EC for high performance in analog cellular environments WIC-1AM-V2 and WIC-2AM-V2 Features You can upgrade WIC-1AM-V2 and WIC-2AM-V2 WAN interface card modem firmware, if a new image is released. For more information about configuring the WIC-1AM-V2 and WIC-2AM-V2 interface cards, and upgrading the modem firmware, see the Cisco WIC-1AM-V2 and WIC-2AM-V2 Analog Modem WAN Interface Card feature document. The WIC-1AM-V2 and WIC-2AM-V2 interface cards support the following protocols: • All standard data rates from 300 bps to 33.6 kbps (V.34bis) • V.42bis and MNP 5 data compression • V.42, LAPM, and MNP 2 to 4 error correction • V.44 for a higher compression ratio over V.42bis compression technology. • V.90 up to 56 kbps • V.92 with quick-connect • MNP 10 for high performance under all line conditions • MNP 10EC for high performance in analog cellular environments Analog Modem WIC LEDs The analog modem WIC LEDs are shown in Figure 102 to Figure 105. The functions of the LEDs are described in Table 28. Table 28 Analog Modem WIC LEDs LED Description SP Speed indication • On = High speed (V.56/V.90) • Off = Low speed (V.32/V.32b/V.34) CN Connect (carrier detect) OH Off-hook status OL-12848-01 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216

Analog Modem WAN Interface Cards
Analog Modem WIC LEDs
3
OL-12848-01
WIC-1AM and WIC-2AM Features
The WIC-1AM and WIC-2AM interface cards support the following protocols:
All standard data rates from 300 bps to 33.6 kbps (V.34
bis
)
V.42
bis
and MNP 5 data compression
V.42, LAPM, and MNP 2 to 4 error correction
V.90 up to 56 kbps
MNP 10 for high performance under all line conditions
MNP 10EC for high performance in analog cellular environments
WIC-1AM-V2 and WIC-2AM-V2 Features
You can upgrade WIC-1AM-V2 and WIC-2AM-V2 WAN interface card modem firmware, if a new
image is released. For more information about configuring the WIC-1AM-V2 and WIC-2AM-V2
interface cards, and upgrading the modem firmware, see the
Cisco WIC-1AM-V2 and WIC-2AM-V2
Analog Modem WAN Interface Card
feature document.
The WIC-1AM-V2 and WIC-2AM-V2 interface cards support the following protocols:
All standard data rates from 300 bps to 33.6 kbps (V.34
bis
)
V.42
bis
and MNP 5 data compression
V.42, LAPM, and MNP 2 to 4 error correction
V.44 for a higher compression ratio over V.42
bis
compression technology.
V.90 up to 56 kbps
V.92 with quick-connect
MNP 10 for high performance under all line conditions
MNP 10EC for high performance in analog cellular environments
Analog Modem WIC LEDs
The analog modem WIC LEDs are shown in
Figure 102
to
Figure 105
. The functions of the LEDs are
described in
Table 28
.
Table 28
Analog Modem WIC LEDs
LED
Description
SP
Speed indication
On = High speed (V.56/V.90)
Off = Low speed (V.32/V.32b/V.34)
CN
Connect (carrier detect)
OH
Off-hook status