Cisco 2501 Getting Started Guide - Page 15
Mounting the Controller on a Wall (Mounting Screws), Step 3 - setup
View all Cisco 2501 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Figure 6 Mounting the Controller on the Wall 282085 1 2 3 1 Front panel (facing down) 2 #10-32 flat head screws 3 Wall mounting screws Step 3 Step 4 After the controller is mounted on the wall, perform the following tasks to complete the installation: • Connecting the Controller Console Port • Securing the Power Adapter Cable • Connecting to the Network For configuration instructions about using the CLI setup program, see the "Running the Bootup Script and Power-On Self Test" section on page 23. Mounting the Controller on a Wall (Mounting Screws) When mounting the 2504 controller on a wall using mounting screws, always mount the controller with the front panel facing down. 15
15
Figure 6
Mounting the Controller on the Wall
Step 3
After the controller is mounted on the wall, perform the following tasks to complete the
installation:
•
Connecting the Controller Console Port
•
Securing the Power Adapter Cable
•
Connecting to the Network
Step 4
For configuration instructions about using the CLI setup program, see the
“Running the
Bootup Script and Power-On Self Test” section on page 23
.
Mounting the Controller on a Wall (Mounting Screws)
When mounting the 2504 controller on a wall using mounting screws, always mount the controller
with the front panel facing down.
1
Front panel (facing down)
3
Wall mounting screws
2
#10-32 flat head screws
282085
2
3
1