Cisco 2924M Hardware Installation Guide - Page 106
BASE-FX Ports
UPC - 746320186047
View all Cisco 2924M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
54968 Connector Specifications Appendix B Connectors and Cable Specifications Figure B-1 10/100 Port Pinouts Pin Label 1 RD+ 2 RD- 3 TD+ 4 NC 5 NC 6 TD- 7 NC 8 NC 12345678 When connecting the 10/100 ports to compatible workstations, servers, routers, and Cisco IP Phones, you must use a straight-through cable wired for 10BASE-T and 100BASE-TX. (Figure B-5 shows the straight-through cable schematics.) When connecting to other switches or repeaters, you must use a crossover cable. (Figure B-4 shows the crossover cable schematics.) Note Use a straight-through cable to connect two ports when one of the ports is designated with an X. Use a crossover cable to connect two ports when both connectors and cables are designated with an X or when both ports do not have an X. 100BASE-FX Ports 100BASE-FX ports use duplex SC connectors, as shown in Figure B-2. These ports use 10/125- or 62.5/125-micron multimode fiber-optic cabling. Catalyst 2900 Series XL Hardware Installation Guide B-2 78-6461-04