Cisco 2955T 12 Hardware Installation Guide - Page 44
Console Port, Management Options
UPC - 746320783277
View all Cisco 2955T 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Management Options Chapter 1 Overview Console Port You can connect a switch to a PC through the console port and the supplied RJ-45-to-DB-9 adapter cable. If you want to connect a switch to a terminal, you need to provide an RJ-45-to-DB-25 female DTE adapter. You can order a kit (part number ACS-DSBUASYN=) with that adapter from Cisco. For console-port and adapter-pinout information, see the "Cable and Adapter Specifications" section on page B-6. Management Options Catalyst 2950 switches offer these management options: • Network Assistant • The Network Assistant is a GUI-based application that you can install and run on your desktop; you do not need a web browser to run it. You can use Network Assistant to manage and monitor switch clusters or standalone devices. For more information, see the Getting Started with Cisco Network Assistant guide and the Network Assistant online help. • Device Manager You can use the device manager, which is in the switch memory, to manage individual and standalone switches. Use the device manager to perform basic switch configuration and monitoring. You can access the device manager from anywhere in your network through a web browser. To launch the Device Manager, enter the switch IP address in the web browser, and press Enter. The device manager page appears. Refer to the device manager online help for more information. • Cisco IOS CLI. You can manage switches by using command-line entries. To access the CLI, connect a PC or a terminal directly to the console port on the switch. If the switch is attached to your network, you can use a Telnet connection to manage the switch from a remote location. For more information, see the switch command reference. For setup instructions that use the CLI, go to Appendix D, "Configuring the Switch with the CLI-Based Setup Program." • CiscoView application You can use the CiscoView device-management application to set configuration parameters and to view switch status and performance information. This application, which you purchase separately, can be a standalone application or part of an Simple Network Management Protocol (SNMP) network-management platform. For more information, see the documentation that came with your CiscoView application. • SNMP network management You can manage switches by using an SNMP-compatible management station running platforms such as HP OpenView and SunNet Manager. The switch supports a comprehensive set of management information base (MIB) extensions and MIB II, the IEEE 802.1D bridge MIB, and four Remote Monitoring (RMON) groups. For more information, see the documentation that came with your SNMP application. 1-24 Catalyst 2950 Switch Hardware Installation Guide OL-6156-01