Cisco 7906G Administration Guide - Page 149

Chapter 5 Configuring Features, Templates, Services, and Users Telephony Features Available for the Cisco Unified IP Phone Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Group call pickup Hold Hold Reversion Description Configuration Reference Allows users to pick up incoming calls within their own group or in other groups. For more information, refer to the: • Cisco Unified Communications Manager Administration Guide, "Pickup Group Configuration" chapter • Cisco Unified Communications Manager System Guide, "Call Pickup" chapter Allows the user to move a connected call from an active state to a held state. • Requires no configuration, unless you want to use music on hold. See "Music-on-Hold" in this table for information. • See also: "Hold Reversion" in this table. Limits the amount of time that a call can be on hold before reverting back to the phone that put the call on hold and alerting the user. Reverting calls are distinguished from incoming calls by a single ring (or beep, depending on the new call indicator setting for the line). This notification repeats at intervals if not resumed. For more information about configuring this feature, refer to Cisco Unified Communications Manager Features and Services Guide, "Hold Reversion" chapter. A call that triggers Hold Reversion also displays an animated icon in the call bubble and a brief message on the status line. You can configure call focus priority to favor incoming or reverting calls. OL-14585-01 Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.1 5-11