Cisco AIR-BR1310G-E-K9 Hardware Installation Guide - Page 25
Integrated Antenna, External Antenna, Antenna, Description
View all Cisco AIR-BR1310G-E-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Chapter 1 Overview Key Features • Cisco Aironet Power Injector LR2T-optional transportation version - 12- to 40-VDC input power Note The power injector and the power module must not be placed in an outdoor unprotected environment. The power module must not be placed in a building's environmental air space, such as above a suspended ceiling. Integrated Antenna The access point/bridge is available with an integrated 13-dBi patch array antenna. The antenna is covered with a radome to protect it from environmental elements. The integrated antenna is vertically polarized. Note Some international regulatory regions may restrict the integrated antenna access point/bridge configuration. External Antenna The access point/bridge is available in an external antenna configuration (see Figure 1-1) for use with Cisco Aironet 2.4-GHz antennas. Two reverse-TNC type RF connectors are provided on the end of the unit to support single or diversity antenna configurations. The antennas connect to the access point/bridge antenna connectors using a coax cable. Table 1-1 lists the external antennas supported by the access point/bridge. Table 1-1 Supported External Antennas Antenna Description AIR-ANT2506 5.2-dBi omnidirectional antenna with vertical polarization AIR-ANT3549 9-dBi patch wall mount antenna AIR-ANT2410Y-R AIR-ANT241201 AIR-ANT19491 AIR-ANT2414S-R1 AIR-ANT33381 10-dBi yagi antenna 12-dBi omnidirectional antenna with vertical polarization 13.5-dBi yagi antenna 14-dBi sector antenna with vertical polarization 21-dBi dish antenna 1. Not supported by the lightweight access point (AIR-LAP1310G) Note To meet regulatory restrictions, the external antenna access point/bridge unit and the external antenna must be professionally installed. The network administrator or other IT professional responsible for installing and configuring the unit is a suitable professional installer. Following installation, access to the unit should be password protected by the network administrator to maintain regulatory compliance. OL-5048-06 Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide 1-5