Cisco AIR-BR1310G-E-K9 Hardware Installation Guide - Page 48
Access Point Bracket, Mast Bracket, Mast Type, Mast Diameter, Mast Attachment Method
View all Cisco AIR-BR1310G-E-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Mounting Hardware Figure 3-1 Multi-Function Mount Chapter 3 Mounting Overview 2 117119 1 1 Access point bracket with support pins 2 Mast bracket Access Point Bracket The access point/bridge bracket mounts on the back side of the unit housing. The bracket mounts on four lugs on the unit. The bracket contains two support pins that are used to suspend the unit in the notches on the mast mounting bracket until you secure the mounting bolts. The access point/bridge must be positioned to obtain the correct antenna polarization that matches the remote antenna. The integrated access point/bridge antenna is vertically polarized. All access point/bridges must use the same antenna polarization for best operation. Mast Bracket The mast bracket attaches to a mast or tower support and is used to secure the access point/bridge (see Table 3-1). Table 3-1 Mast Bracket Attachment Methods Mast Type Roof mount, small mast, or tower Mast Diameter 1.5 to 2.75 in. (30.5 to 69.9 mm) Mast Attachment Method Attach the pipe inside the mounting bracket, between the bracket and access point/bridge. Note The U-bolts provided with the roof mounting kit support mast diameters up to 1.75 in. (44.5 mm). For larger masts, you must supply the U-bolts to attach the access point/bridge. Cisco Aironet 1300 Series Wireless Outdoor Access Point/Bridge Hardware Installation Guide 3-4 OL-5048-06