Cisco AIR-CB21AG-W-K9 Configuration Guide - Page 26
Mounting the Antenna, Inserting the Antenna into Its Base
View all Cisco AIR-CB21AG-W-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Inserting the Client Adapter Figure 1-6 Inserting the Antenna into Its Base Chapter 1 Product Overview and Installation 1 2 3 95584 1 Antenna 2 Notch 3 Antenna base Step 3 Press the antenna cable into the receptacle on the top of the base as shown in Figure 1-6. Step 4 Press the antenna straight down into the receptacle until it clicks into place. Mounting the Antenna Because the PCI card is a radio device, it is susceptible to RF obstructions and common sources of interference that can reduce throughput and range. Follow these guidelines to ensure the best possible performance: • Place the PCI card's antenna in an area where large steel structures such as shelving units, bookcases, and filing cabinets will not obstruct radio signals being transmitted or received. • Place the antenna away from microwave ovens and 2.4- and 5.8-GHz cordless phones. These products can cause signal interference because they operate in the same frequency range as the PCI card. 1-14 Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista OL-16534-01