Cisco AIR-CB21AG-W-K9 Configuration Guide - Page 49
Security, Control Panel > Manage Wireless Networks, Enable, Cisco connection settings, Con
View all Cisco AIR-CB21AG-W-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 2 Configuring Wireless Profiles Viewing and Changing the Settings of a Profile Table 2-2 Profile Management General Settings Setting What to Enter Connect automatically when this network is in range Check this check box if you want the device to connect automatically whenever the wireless network is in range. If you do not check this check box, you must manually connect to this wireless network from the Connect to a network dialog box, which you can access through the Network and Sharing Center. Note You configured this setting when you first created the wireless profile. See the Start this connection automatically check box in Table 2-1 on page 2-7. Connect to a more preferred network if available. Check this check box to connect to a wireless network that you prefer more than the wireless network specified in this profile. To designate the order in which your profiles connect when more than one network is available, Choose Control Panel > Manage Wireless Networks. You can order your wireless profiles in this window. Connect even if the network Check this check box if you want the device to attempt to connect even is not broadcasting if the wireless network is not broadcasting its name. Note You configured this setting when you first created the wireless profile. See the Connect even if the network is not broadcasting check box in Table 2-1 on page 2-7. Enable Cisco connection settings Check this check box to view, configure, and enable Radio Measurement and Advanced Roaming. When you check the Enable Cisco connection settings check box, the Configure button is no longer dimmed. Click on the Configure Button to open the Cisco Connection Settings dialog box. See the "Radio Measurement" section on page 2-18 and the "Advanced Roaming Setting" section on page 2-19 for more information about these Cisco connection settings. Step 3 Click the Security tab to change security settings. The security settings on the Security tab appear (see Figure 2-9). Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista OL-16534-01 2-15