Cisco ASR1004-20G-SEC/K9 Software Guide - Page 339
Using Auto Refresh
View all Cisco ASR1004-20G-SEC/K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 339 highlights
Chapter 14 Configuring and Accessing the Web User Interface Using Auto Refresh For additional information on the commands and the options available with each command, see the Cisco IOS Configuration Fundamentals Command Reference Guide located at: http://www.cisco.com/en/US/docs/ios/fundamentals/command/reference/cf_book.html. Using Auto Refresh The web user interface does not refresh content automatically by default. To set an auto-refresh interval, follow these steps: Step 1 Check the Refresh every check box on the graphical web user interface home page. A check mark appears in the check box (See Figure 14-3). Figure 14-3 Checking Auto Refresh Check Box Step 2 Set the frequency of the auto-refresh interval using the drop-down menu. Step 3 Click the Start button to the right of the drop-down menu. After hitting this button, the Start button becomes the Stop button and a countdown timer placed to the right of the Stop button begins to increment (See Figure 14-4). Figure 14-4 Auto Refresh Counter Example The web user interface screen refreshes every time this counter reaches 0 seconds. If you would like to stop the auto-refresh update, click the Stop button to return to the default setting of no auto-refresh update. OL-16506-10 Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 14-9