Cisco RV016 User Guide - Page 20
DMZ Setting, PPTP Point-to-Point Tunneling Protocol, Heart Beat Signal - default password
UPC - 745883556717
View all Cisco RV016 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 4 Advanced Configuration Keep Alive: Redial Period If you select the Keep Alive option, the Router will keep the connection alive by sending out a few data packets periodically, so your ISP thinks that the connection is still active. This option keeps your connection active indefinitely, even when it sits idle. The default Redial Period is 30 seconds. MTU The Maximum Transmission Unit (MTU) setting specifies the largest packet size permitted for network transmission. In most cases, keep the default, Auto. To specify the MTU, select Manual, and then enter the maximum MTU size. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Back to return to the Network screen without saving any changes. PPTP (Point-to-Point Tunneling Protocol) Point to Point Tunneling Protocol (PPTP) is a service used in Europe, Israel, and other countries. packets periodically, so your ISP thinks that the connection is still active. This option keeps your connection active indefinitely, even when it sits idle. The default Redial Period is 30 seconds. MTU The Maximum Transmission Unit (MTU) setting specifies the largest packet size permitted for network transmission. In most cases, keep the default, Auto. To specify the MTU, select Manual, and then enter the maximum MTU size. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Back to return to the Network screen without saving any changes. Heart Beat Signal Heart Beat Signal is a service used in Australia only. PPTP Specify WAN IP Address Enter the external IP address of the Router. Subnet Mask Enter the subnet mask of the Router. Default Gateway Address Enter the IP address of the default gateway. User Name and Password Enter your account's User Name and Password. The maximum number of characters is 60. Connect on Demand If you select the Connect on Demand option, the connection will be disconnected after a specified period of inactivity (Max Idle Time). If you have been disconnected due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as soon as you attempt to access the Internet again. Enter the number of minutes you want to have elapsed before your Internet access disconnects. The default Max Idle Time is 5 minutes. Keep Alive If you select the Keep Alive option, the Router will keep the connection alive by sending out a few data 10/100 16-Port VPN Router Heart Beat Signal User Name and Password Enter your account's User Name and Password. The maximum number of characters is 60. Heart Beat Server Enter the IP address of the Heart Beat server. MTU The Maximum Transmission Unit (MTU) setting specifies the largest packet size permitted for network transmission. In most cases, keep the default, Auto. To specify the MTU, select Manual, and then enter the maximum MTU size. Click Save Settings to save your changes, or click Cancel Changes to undo them. Click Back to return to the Network screen without saving any changes. DMZ Setting The Router comes with a special DMZ port, which is used for setting up public servers. The DMZ port sits between the local network ports and the Internet port. Servers on the DMZ are publicly accessible. Use of the DMZ port is optional; it may be left unconnected. Using the DMZ is preferred and is, if practical, a strongly recommended alternative to using public LAN servers or putting these servers on WAN ports where they are not protected and not accessible by users on the LAN. 13