Cisco SPA921-NA Administration Guide - Page 64
Call Back, Message Waiting Indication (MWI), Accessing Voicemail, Muting Calls, hand
View all Cisco SPA921-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Using Call Features Chapter 3 Managing Linksys 900 Series IP Phones Call Back This service mimics the call back service offered by the PSTN. The user can activate this service on a busy number such that he is called back as soon as the busy number becomes available. The 900 Series phone implements this feature by repeatedly dialing the busy number periodically until the called party rings or answers, or until the service order is canceled by the user or expires. For that reason, it is referred to as the repeat dialing service. To activate this service, the user selects a line key and enters *66 (call back activation code). The 900 Series phone then uses this call appearance to call the last called number. The retry period and expiration time are configurable. To cancel the service, the user picks up any line and enters *86. When call back service is active, the corresponding Line key flashes green. The user can still use this line to make or answer calls. The call back service is temporarily paused until the call appearance is idle again. When the call back number rings or answers, the call appearance rings like a normal incoming call (the ring to be used is the default ring for the corresponding extension for that Line key). If the call back party answers the call before the local user does, the 900 Series phone sends a holding tone to the call back party. If the local user picks up the call back Line key first, the user hears a ring back tone like a regular outbound call. Message Waiting Indication (MWI) The 900 Series phone indicates message waiting in two ways: • Turning on the red MWI light - LED (with an envelope icon right above LED) on the phone. • Playing stutter tone instead of regular dial tone. The MWI light only applies to new message indication received on Extension 1. It is not turned on or off due to new message indication received on the other extensions [2 to 4]. On the other hand, the 900 Series phone can be configured to play a stutter tone on the individual call appearance according to the message waiting state of the corresponding Extension X. Accessing Voicemail The 900 Series phone has a voicemail retrieval key for quick access to voicemail. If a voicemail access number or URL is not specified, pressing the key brings up a screen where the user can enter the appropriate information. This information can also be entered from the web page or downloaded via provisioning. The 900 Series phone attempts to call the voicemail number or URL if there is an idle call appearance available. Muting Calls The user can mute the audio input into the phone when an audio device is switched on, by pressing the MUTE key. To un-mute, press the MUTE key again. If no audio device is on, pressing the Mute key has no effect. When switching from the speaker phone to the handset, the phone is automatically un-muted. 3-16 Linksys 900 Series IP Phone Administrator Guide Document Version 3.0