Cisco SPA921-NA Administration Guide - Page 93
Non DHCP NTP Server 2, 10 Product Info, 10.1 Product Name, 10.2 Serial Number
View all Cisco SPA921-NA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 4 LCD Command Reference Guide 10 Product Info To change the phone to use a Non DHCP NTP Server 1, press the edit soft key. The display shows the option to enter an IP address. enter the IP Address of the NTP Server1. This IP address is always used by the phone, it is a static IP address. Erase mistaken numbers, one at a time using the delChr soft key. After IP address has been entered, press ok. The display returns to the Non DHCP NTP Server1 setting. The phone uses the IP address immediately. 9.14 Non DHCP NTP Server 2 Shortcut: Menu, 9, 14, ip_address, ok To edit the secondary NTP server used by the phone, press 14 from the Network menu, or scroll down and highlight Non DHCP DNS 1 and press the select soft key. Then press the edit soft key. After entering the IP address of the server, press ok. 10 Product Info To view the parameters in the Product Info, press the Menu button and then press 10, or scroll down until Product Info is highlighted and then press the select soft key. The information displayed cannot be edited. The options on the Product Info menu are as follows: • 10.1 Product Name • 10.2 Serial Number • 10.3 Software Version • 10.4 Hardware Version • 10.5 MAC Address • 10.5 Client Cert 10.1 Product Name Shortcut: Menu, 10, select To view the Product Name, press the Menu button and press 10, or scroll down to the Product Info menu, and press the select soft key. The Product Name is also printed on the bottom of the phone. 10.2 Serial Number Shortcut: Menu, 10, 2, select To view the Serial Number, press 2 from the Product Info menu, or scroll down to highlight Serial Number and press the select soft key. The serial number is also printed on the bottom of the phone. 10.3 Software Version Shortcut: Menu, 10, 3, select To view the software version, press 3 from the Product Info menu or scroll down to highlight Software Version and press the select soft key. Document Version 3.0 Linksys 900 Series IP Phone Administrator Guide 4-11