Cisco WS-X4232 Hardware Maintenance Manual - Page 53
T1 Cabling, cT1 / PRI
UPC - 746320172057
View all Cisco WS-X4232 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Network Connection Considerations Figure 2-32 Channelized T1 Network Interface Processor cT1 / PRI LOOPBACK LOCAL ALARM REMOTE ALARM H3155 DB-15 female T1 Cabling Following are the T1 specifications: • Transmission bit rate: 1.544 megabits per second (Mbps) ± 50 parts per million (ppm) • Output pulse amplitude: 3.0 volts (V) ± 0.6V measured at DSX • Output pulse width: 324 nanoseconds (ns) ± 54 ns • Complies with all AT&T Accunet TR 62411 specifications For the CT1, two standard T1 serial cables are available from Cisco Systems: null-modem and straight-through. A straight through cable connects your router to an external CSU. Null modem cables are used for back-to-back operation and testing. The cables have male 15-pin DB connectors at each end to connect the CT1with the external CSU. The T1 interface cable has two 15-pin DB connectors at each end to connect the CT1with the external T1 CSU. Figure 2-33 shows the T1 interface cable, connectors and pin-outs. Figure 2-33 T1 Interface Cable in 1 in 9 Pin 3 Pin 11 72-XXXX-01 MIP in 11 in 3 T1 or null-modem connector (typical) Pin 9 Pin 1 H2385 Preparing for Installation 2-31