Cisco WS-X6K-SUP1A-PFC= Software Guide - Page 696

Configuring GMRP Chapter 40 Configuring Multicast Services This example shows how to disable the GMRP forward-all option on port 1/1: Console> (enable) set gmrp fwdall disable 1/1 GMRP Forward All groups option disabled on port 1/1. Console> (enable) Configuring GMRP Registration These sections describe how to configure GMRP registration modes on switch ports: • Setting Normal Registration, page 40-16 • Setting Fixed Registration, page 40-16 • Setting Forbidden Registration, page 40-17 Setting Normal Registration Configuring a port in normal registration mode allows dynamic GMRP multicast registration and deregistration on the port. Normal mode is the default on all switch ports. To set normal registration on a port, perform this task in privileged mode: Step 1 Step 2 Task Set normal registration on a port. Verify the configuration. Command set gmrp registration normal mod/port show gmrp configuration This example shows how to set normal registration on port 2/10: Console> (enable) set gmrp registration normal 2/10 GMRP Registration is set normal on port 2/10. Console> (enable) Setting Fixed Registration When you configure a port in fixed registration mode, all the multicast groups currently registered on all ports are registered on the port, but the port ignores any subsequent registrations or deregistrations on other ports. A port in fixed registration mode continues to register multicast groups that are specific to the port. You must return the port to normal registration mode to deregister multicast groups on the port. To set fixed registration on a port, perform this task in privileged mode: Step 1 Step 2 Task Set fixed registration on a port. Verify the configuration. Command set gmrp registration fixed mod/port show gmrp configuration This example shows how to set fixed registration on port 2/10 and verify the configuration: 40-16 Catalyst 6000 Family Software Configuration Guide-Releases 6.3 and 6.4 78-13315-02