Cisco X2000 User Manual - Page 9
Set up your modem-router manually - user manual
View all Cisco X2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Linksys X2000/X3000 Or, if you chose Router only in Step 4: a. Connect the power cable, then turn on the power switch. b. Connect the blue cable to the Cable port on the back of your router and to the modem. Installation b. Select your Internet connection type, other Internet settings, and static settings (if necessary). All of this information should be available from your ISP. 6. If you chose Modem router in Step 4, you are asked to enter your ISP information. a. Select your region, ISP, and the DSL settings your ISP has provided. 7. Follow the on-screen instructions to finish the setup. Set up your modem-router manually Note Run the Setup CD-ROM to install the modem-router. If you cannot run the Setup CD-ROM, refer to the steps below. Note If you are setting up your modem-router in New Zealand, see "NOTE FOR USERS IN NEW ZEALAND" on page 11. 9