Clifford Eagle 2 Owners Guide - Page 15
User-selectable features
View all Clifford Eagle 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
User-selectable features Your Eagle II vehicle security system allows you to set many of its features to your own personal preferences. We have made the programming procedures very simple: to make a change, you just flick the valet switch a few times. The system comes from the factory with all of its features pre-programmed as noted in the table below and on the next page. To change any of the settings, use the following procedure. To restore the feature to its factory setting, just repeat the procedure: 1. Select the feature you wish to program from the table below and on page 15. Note the number of "flicks and chirps" associated with that feature. 2. Turn the ignition on, then immediately flick the valet switch back and forth, counting the number of chirps you hear. Stop when you reach the number of flicks and chirps associated with that feature. 3. If noted, immediately perform the "secondary action." 4. Wait for the program completion confirmation (1-5 chirps), then turn the ignition off. 5. Repeat steps 1-4 for any other features you wish to program. Feature Factory setting # of flicks and chirps Secondary action Program completion confirmation Result AutoArming ON 4 AutoArm & Lock OFF 5 - 1 chirp = OFF Change state from ON to 2 chirps = ON OFF or vice-versa - 1 chirp = OFF Change state from OFF to 2 chirps = ON ON or vice-versa Arm/disarm chirps ON 6 - 1 chirp = OFF Change state from ON to 2 chirps = ON OFF or vice-versa AutoLock/ AutoUnLock ON 9 - 1 chirp = OFF Change state from ON to 2 chirps = ON OFF or vice-versa Siren Duration 30 sec 10 - 1 chirp=60sec Change from 30 to 60 sec. 2 chirps=30sec or vice-versa False Alarm Control and ON 12 Test - 1 chirp = OFF Change state from ON to 2 chirps = ON OFF or vice-versa Add a New Remote to Channel 1 - (arm/disarm) 13 Press remote control button 1 1 chirp Button 1/channel 1 code of the new remote control has been memorised Add a New Remote to Channel 2 (optional - smart boot release) Button 2/channel 2 code 14 Press remote control button 2 2 chirps of the new remote control has been memorised 14