Cobra SL3 Operating Instructions - Page 10
Installing your Cobra SL3 using the Windshield Suction Cup bracket, Follow these instructions
View all Cobra SL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Installation Mounting Installing your Cobra SL3 using the Windshield Suction Cup bracket If you prefer, you can mount your SL3 to the inside of your vehicle's windshield using the suction cup bracket provided. Simply select a position within the windshield so that the top of the unit has a clear view of the sky, remembering that you need to connect the power connection cable, as well as ensuring that you can read the LED display and reach the controls safely. Follow these instructions to mount the unit in this way • Install the suction cups onto the bracket by fitting them into its holes. • Clean the area where you wish to position the bracket thoroughly with a glass cleaner. • Carefully bend the bracket of the SL3 so that when it is mounted on to the windshield the Control Panel is facing in the desired direction. • Slide the SL3 onto the bracket until it is secure and the unit is positioned in as horizontal a position as possible. • To remove the SL3, simply slide the unit off the bracket from the front. • Finally, plug the smaller plug on one end of the power cable into the socket marked DC12V on the back off the SL3 and plug the larger plug into the cigarette lighter socket of your vehicle. Your SL3 is now ready for use. 9