Cobra SL3 Operating Instructions - Page 12
Check the fuse to see if it has blown. If it has, replace it.
 |
View all Cobra SL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installation Power Connection Caution: If you must use pliers to loosen the ring, be careful not to crush the tip. Never use pliers or other tools to retighten the ring on the cigarette lighter plug. 2. Pull the ring straight out, then remove the metal tip, spring and old fuse. 3. Check the fuse to see if it has blown. If it has, replace it. 4. Replace the metal tip and spring inside the ring, then place the fuse inside the cigarette lighter plug and screw the ring back onto the plug. Make sure the metal tip is visible when you reassemble the cigarette lighter plug. 11
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
 |
 |
Installation
Power Connection
Caution
: If you must use pliers to loosen the ring, be careful not to crush the tip. Never use
pliers or other tools to retighten the ring on the cigarette lighter plug.
2.
Pull the ring straight out, then remove the metal tip, spring and old fuse.
3.
Check the fuse to see if it has blown. If it has, replace it.
4.
Replace the metal tip and spring inside the ring, then place the fuse inside the cigarette
lighter plug and screw the ring back onto the plug. Make sure the metal tip is visible when
you reassemble the cigarette lighter plug.
11