Cobra SSR 50 User Guide - Page 4
Where To Mount Your Unit - performance radar / laser detector
View all Cobra SSR 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Your Detector Installation Installation • Where To Mount Your Unit You will get optimum performance from your detector if you Mount it at a point approximately in the center of the vehicle, as low as possible on the front windshield without obstructing the unit's view of the road either to the front or rear. You can also mount it directly on the dashboard. Windshield Mounting Dashboard Mounting The unit's lens must not be blocked and the LaserEye should have a clear view out the back window to allow 360° detection. The LaserEye Should Have A Clear View Radar and laser signals pass through glass but not through other materials and objects. Objects that can block or weaken incoming signals include: I Windshield wiper blades I Mirrored sun screens I Dark tinting at the top of the windshield I Heated windshields currently available on some vehicles (Instaclear for Ford, Electriclear for GM.) Consult your dealer to see if you have this option. 2 English Your Detector Installation Windshield Mounting 1. Attach the rubber cups to the bracket. 2. Make sure the rubber cups and your windshield are clean. 3. Push the bracket firmly onto the windshield. 4. Attach the detector to the bracket. Check the angle of the unit. 5. To adjust the angle if necessary, gently push or pull on the bracket to bend it. DO NOT use the detector to bend the bracket. 6. Plug the power cord into the detector. 7. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. Nothing Comes Close to a Cobra® 3