Cobra SSR 50 User Guide - Page 6
Highway/City Mode, Muting An Alert - 9 band
View all Cobra SSR 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Your Detector Settings Settings • When changing the Settings on your detector, please keep in mind: I Each time the unit is turned On the factory settings of Highway and Auto Mute-On will be set. They can be changed while the unit is in use as described in the following sections. Highway/City Mode Setting your detector to City mode delays all X band audio alerts at lower signal strength levels. (A single beep will sound when the signal is first detected.) This will reduce false alerts while you are driving in, or near, urban areas where there are many sources for conflicting X band signals such as microwave towers and automatic door openers. To change settings, follow the procedure listed below, which indicates what you will see and hear as you complete each step. The factory setting is Highway mode. Highway Mode City Button Press and release P X/K Ka L/C City Mode P X/K Ka L/C To Change From Highway Mode To City Mode Touch the City area. Tone Visual Display One (1) beep L/C appears in the display To Change From City Mode Back To Highway Mode Touch the City area again. Tone Two (2) beeps Visual Display L/C disappears from the display. 6 English Your Detector Settings Muting An Alert Your detector allows you to quickly turn Off an audio Alert by momentarily pressing the Mute button. If you press the Mute button a second time during the Alert, the audio Alert will be turned back On. Mute Button Touch and release Nothing Comes Close to a Cobra® 7