Cobra SSR 50 User Guide - Page 5
Getting Started, Installation - power cord
View all Cobra SSR 50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Your Detector Installation Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear, level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one (1) side of the hook-and-loop fastener. 3. Attach the pad to the dashboard at your chosen location and remove the other paper backing. 4. Attach the detector to the hook-and-loop fastener. You can remove and reattach the unit as often as you like. 6. Plug the power cord into the detector. 7. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. 4 English Your Detector Getting Started Getting Started • Power On P X/K Ka L/C On-Off/ Volume Control Rotate clockwise (away from you) To Turn On The Unit And Adjust The Audio Volume Rotate the On-Off/ Volume control clockwise (away from you). Tone Three (3) beeps Visual Display The power indicator icon "P"will light up in the display indicating that the power is On. NOTE In some vehicles, power is supplied to the cigarette lighter even while the ignition is Off. If this is the case with your vehicle, you should turn Off or unplug your detector when parking for lengthy periods. Nothing Comes Close to a Cobra® 5