Compaq 1200US Presario 1245 Series Maintenance and Service Guide - Page 29

Service Considerations, Tool and Software Requirements, Screws - presario drivers

Get Compaq 1200US - Presario - Celeron 800 MHz PDF manuals and user guides View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Maintenance & Service Guide Presario 1200 Series Model: 1245 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Service Considerations Listed below are some of the considerations that you should keep in mind during the disassembly and re-assembly of the computer. Tool and Software Requirements To service the computer, you need the following: q Compaq screwdriver kit (Spare Part No. 161946-001) q Torx T-9 screwdriver q 3/16-inch and 5mm nut drivers (for screwlocks and standoffs) q Small, standard screwdriver q Small, Phillips screwdriver q Diagnostics software Screws The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process it can damage the unit. Compaq strongly recommends that each screw removed during disassembly be kept with the part from which it was removed, then returned to the original location. As each subassembly is removed from the computer, it should be placed away IMPORTANT: from the work area to prevent damage. Return to Removal & Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
|
Home Page
|
Notice
|
Preface
|
Product Description
|
Troubleshooting
Illustrated Parts Catalog
|
Removal & Replacement Procedures
|
Specifications
Pin Assignments
|
Battery Pack Operations
Service Considerations
Listed below are some of the considerations that you should keep in mind during the
disassembly and re-assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
●
Compaq screwdriver kit (Spare Part No. 161946-001)
●
Torx T-9 screwdriver
●
3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
●
Small, standard screwdriver
●
Small, Phillips screwdriver
●
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the
reassembly process it can damage the unit.
Compaq
strongly recommends that each screw removed during disassembly be kept with the part
from which it was removed, then returned to the original location.
IMPORTANT:
As each subassembly is removed from the computer, it should be placed away
from the work area to prevent damage.
Return to Removal & Replacement Procedures