Compaq 1200US Presario 1245 Series Maintenance and Service Guide - Page 52

Removing the Battery Charger Board, Hard Drives

Get Compaq 1200US - Presario - Celeron 800 MHz PDF manuals and user guides View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Maintenance & Service Guide Presario 1200 Series Model: 1245 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removing the Battery Charger Board Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Heatspreader Keyboard Processor Hard Drives CD Drive Battery Charger Board Modem Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly System Board Dip Switch Settings Memory Module To remove the battery charger board, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove the hard drive. 4. Remove one screw from the battery charger board, unplug the board from the connector on the system board, and lift the battery charger board out of the chassis. To replace the battery charger board, reverse the previous procedures. When replacing the battery charger board, ensure NOTE: that the pins are aligned with the connector on the system board.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Maintenance & Service Guide
Presario 1200 Series
Model: 1245
|
Home Page
|
Notice
|
Preface
|
Product Description
|
Troubleshooting
Illustrated Parts Catalog
|
Removal & Replacement Procedures
|
Specifications
Pin Assignments
|
Battery Pack Operations
Removing the Battery Charger Board
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Palmrest
Cover with
Touch Pad
Heatspreader
Keyboard
Processor
Hard Drives
CD Drive
Battery
Charger Board
Modem
Display Panel
Assembly
Upper CPU
Cover
Speaker
Assembly
Diskette Drive
Fan Assembly
System Board
Dip Switch
Settings
Memory
Module
To remove the
battery charger
board, complete
the following
steps:
1. Prepare the
computer for
disassembly
.
2. Remove the
palmrest cover
with touch pad
.
3. Remove the
hard drive
.
4. Remove one
screw from the
battery charger
board, unplug
the board from
the connector
on the system
board, and lift
the battery
charger board
out of the
chassis.
To replace the
battery charger
board, reverse
the previous
procedures.
NOTE:
When
replacing
the
battery
charger
board,
ensure
that the
pins are
aligned
with the
connector
on the
system
board.