Compaq 1200US Presario Select 1200 Series Maintenance and Service Guide - Page 47

Removing the Palmrest, Cover with Touch Pad, continued

Get Compaq 1200US - Presario - Celeron 800 MHz PDF manuals and user guides View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Maintenance & Service Guide Presario Series Models: 1246, 1247, 1277, 1278, and 1279 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removal and Replacement Procedures Removing the Palmrest Cover with Touch Pad, continued 5. Turn the computer over (right side up), pull forward on the display latches to release, and open the display assembly. 6. Lift up the front end of the palmrest cover with touch pad and remove it from the groove in the chassis. 7. Tilt the palmrest cover with touch pad, allowing it to rest on top of the keyboard, and disconnect the flex cable from the LIF connector on the palmrest cover. CAUTION: When replacing the palmrest cover with touch pad, ensure that the cable is fully inserted into the LIF connector on the system board. If the metal end comes in contact with the keyboard, damage may occur to the computer. To replace the palmrest cover with touch pad, reverse the previous procedures. When replacing the palmrest cover, ensure that the cable NOTE: is properly routed through the slot on the Upper CPU cover. Return to Removal & Replacement Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Maintenance & Service Guide
Presario Series
Models: 1246, 1247, 1277, 1278, and 1279
|
Home Page
|
Notice
|
Preface
|
Product Description
|
Troubleshooting
Illustrated Parts Catalog
|
Removal & Replacement Procedures
|
Specifications
Pin Assignments
|
Battery Pack Operations
Removal and Replacement Procedures
Removing the Palmrest
Cover with Touch Pad,
continued
5. Turn the computer over
(right side up), pull forward
on the display latches to
release, and open the display
assembly.
6. Lift up the front end of the
palmrest cover with touch pad
and remove it from the
groove in the chassis.
7. Tilt the palmrest cover with
touch pad, allowing it to rest
on top of the keyboard, and
disconnect the flex cable from
the LIF connector on the
palmrest cover.
CAUTION:
When
replacing the palmrest
cover with touch pad,
ensure that the cable is
fully inserted into the
LIF connector on the
system board.
If the metal end comes
in contact with the
keyboard, damage may
occur to the computer.
To replace the palmrest cover
with touch pad, reverse the
previous procedures.
NOTE:
When replacing the
palmrest cover,
ensure that the cable
is properly routed
through the slot on
the Upper CPU
cover.
Return to Removal &
Replacement Procedures