Compaq 1200US Presario Select 1200 Series Maintenance and Service Guide - Page 65
Important
View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Maintenance & Service Guide Presario Series Models: 1246, 1247, 1277, 1278, and 1279 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removal and Replacement Procedures Removing the Display Panel Assembly, continued 9. Remove the LVDS connector on the end of the display flex data cable . This step applies only if using an LVDS NOTE: connector. If using a CMOS connector, disregard this step. Compaq recommends replacing the LVDS IMPORTANT: interface connector on the display flex data cable after removing. CAUTION: The connector on the end of the flex cable must be removed before the cable can be routed through the slot on the Upper CPU cover. 10. Gently pull the flex data cable and backlight cable attached to the display panel assembly through the slot on the Upper CPU cover and remove the display panel assembly with flex data and backlight cable attached. When removing the display panel NOTE: assembly, observe the display panel assembly flex cable routing and position. To replace the display panel assembly, reverse the previous procedures. Return to Removal & Replacement Procedures