Compaq 1200US Presario Select 1200 Series Maintenance and Service Guide - Page 52
Removing the, 3-GB or 4.8, GB Hard Drive
View all Compaq 1200US manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Maintenance & Service Guide Presario Series Models: 1246, 1247, 1277, 1278, and 1279 | Home Page | Notice | Preface | Product Description | Troubleshooting Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications Pin Assignments | Battery Pack Operations Removal and Replacement Procedures Removal Sequence Electrostatic Discharge Service Considerations Cables and Connectors Preparing the Computer for Disassembly Battery Pack Palmrest Cover with Touch Pad Heatspreader Keyboard Processor Hard Drive CD Drive Battery Charger Board Modem Display Panel Assembly Upper CPU Cover Speaker Assembly Diskette Drive Fan Assembly System Board Dip Switch Settings Memory Module Removing the 4.3-GB or 4.8GB Hard Drive Illustrations may show parts removed that are not part of this procedure. NOTE: It is necessary to remove only the parts listed in the written procedure. To remove the hard drive, complete the following steps: 1. Prepare the computer for disassembly. 2. Remove the palmrest cover with touch pad. 3. Remove two screws from the hard drive mounting bracket and lift out the hard drive with drive mounting bracket attached. Next Step