Compaq 215999-002 Compaq Deskpro EX and Deskpro EXS Series of Personal Compute - Page 42
The primary 3.5-inch diskette drive should only be installed into bay 3. Bay 3 is
UPC - 720591550486
View all Compaq 215999-002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
6. Remove the bracket brace 1 from the top of the drive adapter by squeezing inward on both sides, then rotating the brace up and out. 7. Remove the drive bezel 2. 8. Remove the three screws 3 that secure the drive 4 to the drive adapter. 9. Lift the drive out of the drive adapter. 10. Remove the guide screws from the drive 5. To replace the drive, reverse the previous procedures. ✎ The primary 3.5-inch diskette drive should only be installed into bay 3. Bay 3 is the bottom bay in the minitower. When replacing the drive, use the existing screws. Metric screws (M3) have a black finish while U.S. screws (#6) have a silver finish. Diskette drives use black metric screws. The drive adapters use silver U.S. screws. CAUTION: When servicing the computer, ensure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. CAUTION: Use only 3/16-inch or 5-mm long screws as guide screws. Longer screws can damage the internal components of the drive. Compaq Deskpro EX and Deskpro EXS Series of Personal Computers 4-15