Compaq 470007-802 Deskpro EN Hardware Reference Guide -- Slim Desktop Models
Compaq 470007-802 - Deskpro EN - 256 MB RAM Manual
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq 470007-802 manual content summary:
- Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 1
Hardware Reference Guide Compaq Deskpro EN Series of Personal Computers Slim Desktop Models - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 2
Hardware Reference Guide Compaq Deskpro EN Series of Personal Computers Slim Desktop Models - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 3
. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. Hardware Reference Guide Compaq Deskpro EN Series of Personal Computers Slim Desktop Models First Edition (October 2000) Part Number 178171-002 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 4
Sequence ...1-1 When to Reconfigure the Computer 1-3 chapter 2 Hardware Upgrades Serviceability Features...2-1 Removing the Access Panel 2-1 Rotating the Drive Cage...2-3 Internal Components 2-18 Smart Cover Lock...2-20 Using the Smart Cover FailSafe Key 2-20 Hardware Reference Guide iii - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 5
appendix a Specifications ...A-1 appendix b Hard Drive Installation Guidelines Using the Cable-Select Feature with Ultra ATA Devices B-1 Installing SCSI Devices ...B-2 Guidelines for Installing Optional SCSI Devices B-2 Cabling for Optional SCSI Devices B-4 Using SCSISelect with SCSI Devices B-5 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 6
1 chapter INSTALLATION GUIDELINES This guide explains how to remove the computer cover or access panel and install the following optional equipment upgrades: Additional disable the Smart Cover Sensor. For more information about Computer Setup, refer to the Computer Setup guide. Hardware Reference - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 7
cover. 6. Turn on the monitor, computer, and any devices you want to test. 7. Reconfigure the computer, if necessary. Refer to the Computer Setup guide for instructions about using Computer Setup. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the cover - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 8
and Play device or is not automatically detected after installation, follow these instructions: In Windows 95 and later operating systems, select the Add New Hardware icon in the Control Panel and follow the instructions on the screen. To reconfigure the computer in Windows NT - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 9
Features Your computer includes features that make it easier to upgrade and service. Removing the Access Panel The quick release cover latches, located near the rear on each side down the operating system properly, then turn off the computer and any external devices. Hardware Reference Guide 2-1 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 10
3. Disconnect the power cord from the power outlet. 4. Loosen the retaining screw located on the back of the unit . 5. Slide the cover latches on the sides near the back of the computer . 6. Lift up the back of the access panel and pull it toward the back of the unit about 1 inch (2.5 cm) so the - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 11
easily connect the drive power and signal cables. When installing optional drives, you must install guide screws to ensure the drive will line up correctly in the drive cage. Compaq has provided extra guide screws, installed in the bottom of the computer chassis, next to the power supply. ! WARNING - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 12
Internal Components (Intel 815e Chipset) Internal Components in Intel 815e-Based Desktop Models Cable lock (optional) AGP graphics slot Smart Cover Lock Processor Power supply Dual-inline memory module (DIMM) sockets Primary hard drive Diskette drive CD-ROM drive - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 13
standard 168-pin, unbuffered PC100- or PC133- compliant SDRAM DIMMs, depending on the model. The SDRAM DIMMs must support CAS Latency 2 or 3 (CL = 2 or CL = 3). They must also contain the mandatory Joint to touch any of the contacts. Doing so may damage the module. Hardware Reference Guide 2-5 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 14
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, then turn off the computer and any external devices, then disconnect the power cord from the power outlet. 3. Remove the access panel and - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 15
top of the expansion slot cover, then remove the expansion slot cover from the slot as illustrated. Removing a Screw and Expansion Slot Cover Hardware Reference Guide 2-7 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 16
Removing or Installing a PCI Card 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer and any external devices, then disconnect the power cord from the power outlet. 3. - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 17
access panel. 13. Connect external cables to the installed card, if needed. 14. Reconfigure the computer, if necessary. Refer to the Computer Setup Guide for instructions about using Computer Setup. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 18
, such as IDE CD-ROM, tape, and diskette drives to the secondary controller. You must install guide screws to ensure the drive will line up correctly in the drive cage. Compaq has provided extra guide screws, installed in the bottom of the computer chassis, next to the power supply. Some options - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 19
on each side of the drive. Some options use M3 metric thread hardware. Extra guide screws are provided on the bottom of the chassis, next to the power supply. The Compaq-supplied metric screws are black. 6. Install the drive in the desired drive bay by sliding it into the slots and toward - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 20
7. If installing a CD-ROM, DVD-ROM, or tape drive, rotate the drive cage to the upright position. 8. Connect the drive power and signal cables and, if it is a CD-ROM drive, connect the audio cable. The other end of the audio cable should be connected to the audio connector on the system board. - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 21
caution to prevent damaging the data and power cables. 10. Replace the access panel. 11. Reconfigure the computer, if necessary. Refer to the Computer Setup Guide for more information. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 22
6. Set the hard drive into the hard drive bay by placing the guide screws toward the front of the drive into the slots in the drive cage . 7. Place the back of the hard drive down flat in the - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 23
Installing the Secondary Hard Drive Hardware Reference Guide 2-15 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 24
Removing a CD-ROM Drive from the Drive Cage 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer, disconnect the power cord from the electrical outlet, and remove the - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 25
the right . 6. Slide the drive out of the drive cage . Removing a Diskette Drive from the Drive Cage 7. Store the drive in antistatic packaging. Hardware Reference Guide 2-17 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 26
Removing a Hard Drive from the Drive Cage 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer, disconnect the power cord from the electrical outlet, and remove the - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 27
Removing the Secondary Hard Drive from the Drive Cage 7. Store the drive in antistatic packaging. Hardware Reference Guide 2-19 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 28
information about locking the Smart Cover Lock, refer to the Desktop Management guide. Using the Smart Cover FailSafe Key If you enable the Smart Cover Contact your authorized Compaq reseller or service provider. Refer to the Compaq World Wide Web site (www.compaq.com) for ordering information - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 29
Cover Lock Screws 3. Remove the computer cover. To reattach the Smart Cover Lock, secure the lock in place with the tamper-proof screws. Hardware Reference Guide 2-21 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 30
appendix A SPECIFICATIONS Compaq Deskpro EN, Slim Desktop Desktop Dimensions Height Width Depth Approximate Weight Desktop Model Weight Supported (maximum distributed load) Temperature Range Operating 264 VAC 220-240 VAC 50-60 Hz 200 W 3 A 265 kg-cal/hr 133 kg-cal/hr Hardware Reference Guide A-1 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 31
Feature with Ultra ATA Devices Optional drives are available from Compaq in kits that include a special drive cable. The installation requires no jumper setting changes on the existing or optional drives. All Compaq drives have the jumpers preset for cable- select installation. If installing a - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 32
Optional SCSI Devices When installing additional SCSI devices, you must adhere to the following guidelines: The Wide Ultra160 SCSI host adapter supports up to 15 wide SCSI devices. Every SCSI device must have a unique identification (ID) number (0 - 15). The SCSI host adapter identifies - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 33
a unique SCSI ID number. Second, you must determine if the device ought to have termination enabled or disabled. Set the termination if necessary. Hardware Reference Guide B-3 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 34
cage, between the raised areas. For additional information about installing optional SCSI devices, refer to the documentation that comes with the device or contact your Compaq authorized dealer, reseller, or service provider. B-4 Hard Drive Installation Guidelines - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 35
Ctrl> for SCSISelect Utility message appears during POST. In Post Messages Disabled mode: When the Compaq logo screen appears, press any key to exit the logo screen. Immediately after exiting the logo configuring POST message display status, refer to the Computer Setup guide. Hardware Reference - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 36
order to forward them to recycling or proper disposal, please use the public collection system or return them to Compaq, your authorized partners, or their agents. 1. If you have locked the Smart Cover Lock, use Computer an expansion card to gain access to the battery. Hardware Reference Guide C-1 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 37
3. Locate the battery and battery holder on the system board, as shown in the following illustration. Battery and Battery Holder 4. Lift the battery out of its holder. Removing the Coin Cell Battery 5. Slide the replacement battery into position, positive side up. The battery holder automatically - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 38
computer and turn on power to the computer. 8. Reset the date and time, your passwords, and any special system setups, using Compaq Computer Setup. Refer to the Computer Setup guide. If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable the Smart Cover Sensor - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 39
. The cable lock can be purchased from Kensington Microware Limited or Compaq authorized dealers, resellers, and service providers. Ask for the Kensington MicroSaver Security System, Model 64068. of the computer and lock with the key. Compaq Deskpro EN, Slim Desktop Hardware Reference Guide D-1 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 40
Compaq Deskpro EN, Convertible Minitower Compaq Deskpro EN, Small Form Factor D-2 Security Lock Provisions - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 41
before removing them from their containers. Avoid touching pins, leads, or circuitry. Always be properly grounded when touching a static-sensitive component or assembly. Hardware Reference Guide E-1 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 42
work mat. If you do not have any of the suggested equipment for proper grounding, contact your Compaq authorized dealer, reseller, or service provider. For more information on static electricity, contact your Compaq authorized dealer, reseller, or service provider. E-2 Electrostatic Discharge - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 43
extremes of heat and cold. For information about the recommended temperature and humidity ranges for your computer, refer to Appendix A, "Specifications," in this guide. Keep liquids away from the computer and keyboard. Never cover the ventilation slots on the monitor with any type of material - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 44
may damage the finish. Safety If any object or liquid falls into the drive, immediately unplug the computer and have it checked by an authorized Compaq service provider. F-2 Routine Computer Care and Shipping Preparation - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 45
Follow these suggestions when preparing to ship your computer: 1. Back up the hard drive files onto PD discs, tape cartridges, or diskettes. Be sure that the backup media is protect them. For environmental nonoperating ranges, refer to Appendix A, "Specifications," in this guide. Hardware Reference - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 46
, 2-4 H hard drive, 2-4 I installation sequence, 1-1 internal components, 2-4 M memory installing additional, 2-5 O optional equipment adding or removing, 1-3 P Plug and Play, 1-3 power supply, 2-4 processor, 2-4 R rotating drive cage, 2-3 Hardware Reference Guide I-1 - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 47
S screws, 2-10 security Smart Cover Lock, 2-4, 2-20 Smart Cover Sensor, 2-4 slot cover, expansion, 2-7 slots, expansion, 2-7 Smart Cover FailSafe Key, 2-20 Smart Cover Lock, 2-4, 2-20 Smart Cover Sensor, 2-4 speaker, 2-4 system configuration, 1-3 T tape drive, installing, 2-11 I-2 Index - Compaq 470007-802 | Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 48
178171-002
Hardware Reference Guide
Compaq Deskpro EN Series of Personal Computers
Slim Desktop Models