Compaq 470007-802 Deskpro EN Hardware Reference Guide -- Slim Desktop Models - Page 25
Removing a Diskette Drive from the Drive Cage, Disconnect the drive power cable and signal cable.
View all Compaq 470007-802 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Removing a Diskette Drive from the Drive Cage 1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock and disable the Smart Cover Sensor. 2. Shut down the operating system properly, turn off the computer, disconnect the power cord from the electrical outlet, and remove the computer cover. 3. Rotate the drive cage to its upright position. 4. Disconnect the drive power cable and signal cable. 5. Pull the green drive release latch to the right . 6. Slide the drive out of the drive cage . Removing a Diskette Drive from the Drive Cage 7. Store the drive in antistatic packaging. Hardware Reference Guide 2-17
Hardware Reference Guide
2-17
Removing a Diskette Drive from the Drive Cage
1.
If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock and disable the Smart Cover Sensor.
2.
Shut down the operating system properly, turn off the computer,
disconnect the power cord from the electrical outlet, and remove
the computer cover.
3.
Rotate the drive cage to its upright position.
4.
Disconnect the drive power cable and signal cable.
5.
Pull the green drive release latch to the right
.
6.
Slide the drive out of the drive cage
.
Removing a Diskette Drive from the Drive Cage
7.
Store the drive in antistatic packaging.