Compaq 470013-444 Deskpro EX Series of Personal Computers Maintenance&Serv - Page 29
Bezel Blank, down to release from the bezel blank tabs.
UPC - 720591804381
View all Compaq 470013-444 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4.5 Bezel Blank 1. Prepare the computer for disassembly (Section 4.2). WARNING: Power is continuous to the system board and power supply even when the power switch is turned off. To prevent damage to the unit, disconnect the power cord from the power source or the unit before beginning disassembly procedures. 2. Remove the computer cover (Section 4.3) and lay it down on its top on a soft, protected surface. 3. Push the two snaps 1 down to release from the bezel blank tabs. 4. Remove the bezel blank 2. To install a bezel blank, reverse the removal procedure. Compaq Deskpro EX Series of Personal Computers 4-5
Compaq Deskpro EX Series of Personal Computers
4-5
4.5
Bezel Blank
1.
Prepare the computer for disassembly (Section 4.2).
WARNING:
Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2.
Remove the computer cover (Section 4.3) and lay it down on its top on a soft, protected
surface.
3.
Push the two snaps
1
down to release from the bezel blank tabs.
4.
Remove the bezel blank
2
.
To install a bezel blank, reverse the removal procedure.