Compaq AP550 Compaq Professional Workstation AP550 Hardware Reference Guide - Page 26
Preparing for Drive Installation, Removing the Bezel Blank
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Preparing for Drive Installation Removing the Bezel Blank Remove the drive bezel before installing any removable media storage device, such as a tape drive, CD-ROM or DVD-ROM drive, or diskette drive in these bay locations. To remove the bezel blank: 1. Turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet and the back of the workstation. 3. Remove the workstation access panel. Refer to Removing the Workstation Access Panel in this chapter. 4. Remove the front bezel. Refer to Removing the .ront Bezel in this chapter. 5. Gently pull the subpanel, with the bezel blank secured, away from the front bezel. CAUTION: Hold the subpanel straight when you pull it away from the front bezel. Pulling the subpanel away at an angle could damage the pins that align it within the front bezel. Compaq Professional Workstation AP550 Hardware Reference Guide 2-11