Compaq AP550 Compaq Professional Workstation AP550 Hardware Reference Guide - Page 9

Changing from a Minitower to a Desktop Configuration - professional

Get Compaq AP550 - Professional - 128 MB RAM PDF manuals and user guides
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

Changing from a Minitower to a Desktop Configuration To change from a minitower to a desktop configuration: 1. Turn off the workstation and any external devices. 2. Disconnect the power cord from the grounded AC outlet and the back of the workstation, and then disconnect the network cable from the system. 3. Remove the workstation access panel. Refer to the instructions “ Removing the Workstation Access Panel” in Chapter 2. 4. Remove the front bezel. Refer to “ Removing the .ront Bezel” in Chapter 2. 5. Disconnect all power and data cables from the drives in the 5.25-inch drive bay. 6. To release a drive from the 5.25-inch drive bay, slide the drivelock as shown. Carefully push the drive from the back of the unit until the drive casing can be grasped. Releasing the drives with the drivelock CAUTION: Do not hold the faceplate while removing a drive. Only hold a drive by its casing. Compaq Professional Workstation AP550 Hardware Reference Guide 1-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Compaq Professional Workstation AP550 Hardware Reference Guide
1-5
Compaq Confidential - Need to Know Required
Changing from a Minitower to a Desktop Configuration
To change from a minitower to a desktop configuration:
1.
Turn off the workstation and any external devices.
2.
Disconnect the power cord from the grounded AC outlet and the
back of the workstation, and then disconnect the network cable
from the system.
3.
Remove the workstation access panel. Refer to the instructions
± Removing the Workstation Access Panel² in Chapter 2.
4.
Remove the front bezel. Refer to ± Removing the ³ront Bezel² in
Chapter 2.
5.
Disconnect all power and data cables from the drives in the
5.25-inch drive bay.
6.
To release a drive from the 5.25-inch drive bay, slide the drivelock
as shown. Carefully push the drive from the back of the unit until
the drive casing can be grasped.
Releasing the drives with the drivelock
CAUTION:
Do not hold the faceplate while removing a drive. Only
hold a drive by its casing.