Compaq AP550 Compaq Professional Workstation AP550 Hardware Reference Guide - Page 38

Replace the workstation access panel., Connect external cables to the installed board, if necessary.

Get Compaq AP550 - Professional - 128 MB RAM PDF manuals and user guides
UPC - 743172976857
View all Compaq AP550 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

4. Slide the expansion board into the expansion slot and press the board firmly into place. When installing an expansion board, press firmly on the board so that the whole connector seats properly in the expansion board slot. ✎ If you are installing a full-length PCI board, make sure the card is engaged with the card guide. Installing an expansion board 5. Replace the screw at the side of the expansion slot. 6. Replace the workstation access panel. 7. Connect external cables to the installed board, if necessary. 8. Plug the power cord back into the grounded AC outlet. 9. Turn on the system. 10. Reconfigure the workstation, if necessary. Compaq Professional Workstation AP550 Hardware Reference Guide 2-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
Compaq Professional Workstation AP550 Hardware Reference Guide
2-23
Compaq Confidential - Need to Know Required
4.
Slide the expansion board into the expansion slot and press the
board firmly into place.
When installing an expansion board, press firmly on the board so
that the whole connector seats properly in the expansion board
slot.
If you are installing a full-length PCI board, make sure the
card is engaged with the card guide.
Installing an expansion board
5.
Replace the screw at the side of the expansion slot.
6.
Replace the workstation access panel.
7.
Connect external cables to the installed board, if necessary.
8.
Plug the power cord back into the grounded AC outlet.
9.
Turn on the system.
10.
Reconfigure the workstation, if necessary.