Compaq Armada V300 Compaq Armada E500 and Armada V300 Maintenance and Service - Page 73
Table 2-18, Problem, Possible Cause, Solution, Power Management
View all Compaq Armada V300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Table 2-18 continued Problem Possible Cause Solution Characters on computer display are dim (continued). Power Management, which controls Suspend and Hibernation, is disabled and the battery pack has discharged. s Replace the battery pack and turn on the computer. s Connect the computer to an external power source and turn on the computer. Computer screen is blank and external monitor displays information. Display was switched to the external monitor. Press Fn+F4 to display information on the computer screen; press Fn+F4 again to display information simultaneously on both screens. Display switch is stuck. Tap the switch. Fn+F4 hotkey combination does not switch between internal and external displays. CRT or other display device is not connected properly. Check your connections to ensure that an external device is connected properly. Troubleshooting 2-37