Compaq Armada m700 Compaq Armada M700 Series of Personal Computers Reference G - Page 81
Selecting a MultiBoot Utility, Changing the Startup Sequence in Computer Setup - enter bios
View all Compaq Armada m700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
IMPORTANT: Changing the boot order also changes the logical drive designations. For example, if you start up from a hard drive in the computer MultiBay, that hard drive becomes drive C and a hard drive in the hard drive bay becomes drive D. If you start up from a diskette drive in the external diskette drive bay, that diskette drive becomes drive A. Starting up from a network board does not affect logical drive designations. Selecting a MultiBoot Utility You can enable MultiBoot and change the sequence of the computer drive bay locations that the computer searches during startup by using Compaq Computer Security or Computer Setup. s Computer Setup can be used even when your operating system is not working or will not load. s In Computer Setup the list of bootable devices includes only the bootable devices currently in the computer or an optional docking base. The external diskette drive bay does not list in the boot order field, but is always searched first for a bootable diskette. s In Compaq Computer Security the list of bootable devices includes all bootable devices supported by the BIOS. If you set a boot sequence for a bootable device that is not currently in the system, the device will be included in the boot sequence when it is present and ignored when it is not present. Changing the Startup Sequence in Computer Setup 1. Restart the computer, then press F10 when the blinking cursor appears upper-right on the screen. s To change the language, press F2. s For navigation instructions, press F1. 2. Select Advanced!Boot Options, then press Enter. 3. Toggle the MultiBoot field to Enable. 4. Toggle the Boot Order fields to the boot sequence you prefer. 5. To save your preferences and exit Boot Options, press F10. 6. To confirm saving your changes, close Computer Setup, and restart the computer, select File!Save Changes and Exit, then press F10. 5-18 Using Drives