Compaq CQ2000 Upgrade and Service - Page 5

Removing and Replacing the Hard Disk Drive 20 to 40 minutes Before You Begin After you replace the hard disk drive, you have to perform a system recovery. Refer to the documentation that came with your computer for detailed system recovery steps. IMPORTANT: A hard drive is extremely sensitive to shock impact. Do not bang or drop it. Do not touch the circuit board. Static electricity can damage the drive. Observe the following requirements before removing and replacing a hard disk drive. Tools Needed Flathead screwdriver WARNING: 1 Never open the cover with the power cord attached or power applied. You may damage your computer or be injured from the spinning fan blades. 2 Avoid touching sharp edges inside the computer. NOTE: Computer features may vary by model. Hewlett-Packard recommends using a magnetic tipped screwdriver. You can use a flathead screwdriver with the following screw. CAUTION: This product contains components that are easily damaged by electrostatic discharge (ESD). To reduce the chance of ESD damage, work over a noncarpeted floor. If possible, ground yourself while touching the metal frame of the computer, prior to handling components. IMPORTANT: Treat an optical disc drive with care. It is easy to damage. It is sensitive to shock impact. Do not bang or drop it. 517212-001 - Removing and Replacing the Hard Disk Drive 3