Compaq Evo n610c Compaq Evo Notebook N600c, N610c, N610v and N620c Notebook PC - Page 154
Removing the Fan on an Evo Notebook N600c
View all Compaq Evo n610c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Removal and Replacement Procedures ✎ Steps 5 through 7 apply only to Evo Notebook N600c models. 5. Remove the PM2.0 × 4.0 screw 1 and PM2.5 × 5.0 screw 2 that secure the fan to the system board (Figure 5-29). 6. While holding the system board above the work surface, push the left side of the fan up 3 from the bottom of the system board. 7. When the left edge of the fan has cleared the system board, slide the fan to the left 4 and out of the heat sink. Figure 5-29. Removing the Fan on an Evo Notebook N600c 5-44 Maintenance and Service Guide
5–44
Maintenance and Service Guide
Removal and Replacement Procedures
✎
Steps 5 through 7 apply only to Evo Notebook N600c models.
5. Remove the PM2.0 × 4.0 screw
1
and PM2.5 × 5.0 screw
2
that secure the fan to the system board (Figure 5-29).
6.
While holding the system board above the work surface, push
the left side of the fan up
3
from the bottom of the system
board.
7. When the left edge of the fan has cleared the system board,
slide the fan to the left
4
and out of the heat sink.
Figure 5-29. Removing the Fan on an Evo Notebook N600c