Compaq Mini CQ10-800 Maintenance and Service Guide - Page 53

Hard drive, Lift the shield

Get Compaq Mini CQ10-800 PDF manuals and user guides View all Compaq Mini CQ10-800 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Hard drive Description Hard drive only (does not include bracket, cover, or screws): 500-GB, 7200-rpm, 7.0-mm 320-GB, 7200-rpm, 7.0-mm 320-GB, 5400-rpm, 7.0-mm 250-GB, 7200-rpm, 7.0-mm 250-GB, 5400-rpm, 7.0-mm 160-GB, 7200-rpm, 7.0-mm Hard Drive Hardware Kit (includes bracket, cover, and screws) Hard Drive Cable Kit (includes hard drive connector cable) Spare part number 634925-001 649906-001 and 648925-001 648924-001 649902-001 and 648911-001 648910-001 649901-001 656272-001 628532-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the following components: a. Battery (see Battery on page 40). b. Service access cover (see Service access cover on page 43). Remove the hard drive: 1. Lift the shield (1) that covers the hard drive connector on the system board. 2. Disconnect the hard drive connector cable (2) from the system board. 3. Remove the three Phillips 2.0×4.0 screws (3) that secure the hard drive to the computer. 4. Lift the shield (4) that covers the hard drive to allow removal of the drive. Component replacement procedures 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Hard drive
Description
Spare part number
Hard drive only (does not include bracket, cover, or screws):
500-GB, 7200-rpm, 7.0-mm
634925-001
320-GB, 7200-rpm, 7.0-mm
649906-001 and
648925-001
320-GB, 5400-rpm, 7.0-mm
648924-001
250-GB, 7200-rpm, 7.0-mm
649902-001 and
648911-001
250-GB, 5400-rpm, 7.0-mm
648910-001
160-GB, 7200-rpm, 7.0-mm
649901-001
Hard Drive Hardware Kit (includes bracket, cover, and screws)
656272-001
Hard Drive Cable Kit (includes hard drive connector cable)
628532-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Battery (see
Battery
on page
40
).
b.
Service access cover (see
Service access cover
on page
43
).
Remove the hard drive:
1.
Lift the shield
(1)
that covers the hard drive connector on the system board.
2.
Disconnect the hard drive connector cable
(2)
from the system board.
3.
Remove the three Phillips 2.0×4.0 screws
(3)
that secure the hard drive to the computer.
4.
Lift the shield
(4)
that covers the hard drive to allow removal of the drive.
Component replacement procedures
45