Compaq Mini CQ10-800 Maintenance and Service Guide - Page 68
Remove the 8 Phillips 2.0×4.0 screws that secure the top cover to the base enclosure.
View all Compaq Mini CQ10-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
11. Release the ZIF connector (4) to which the TouchPad button cable is connected, and then disconnect the TouchPad button cable (5) from the system board. 12. Remove the 8 Phillips 2.0×4.0 screws that secure the top cover to the base enclosure. 60 Chapter 4 Removal and replacement procedures
11.
Release the ZIF connector
(4)
to which the TouchPad button cable is connected, and then
disconnect the TouchPad button cable
(5)
from the system board.
12.
Remove the 8 Phillips 2.0×4.0 screws that secure the top cover to the base enclosure.
60
Chapter 4
Removal and replacement procedures