Compaq Presario CQ42-400 Compaq Presario CQ42 Notebook PC and HP G42 Notebook - Page 76

Release the ZIF connector to which the touchpad button board cable

Get Compaq Presario CQ42-400 - Notebook PC PDF manuals and user guides View all Compaq Presario CQ42-400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 76 highlights

3. Remove the five Phillips PM2.5×6.5 screws (2), the two Phillips PM2.5x4.0 screws (3), and the four Phillips PM2.5x3.0 screws (4) that secure the top cover to the base enclosure. 4. Turn the computer display-side up with the front toward you. 5. Open the computer as far as possible. 6. Release the ZIF connector to which the touchpad (1) is connected and disconnect the cable from the system board. 7. Release the ZIF connector to which the touchpad button board cable (2) is connected and disconnect the cable from the system board. 8. Disconnect the speaker cable (3) from the system board. 66 Chapter 4 Removal and replacement procedures ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
3.
Remove the five Phillips PM2.5×6.5 screws
(2)
, the two Phillips PM2.5x4.0 screws
(3)
, and the
four Phillips PM2.5x3.0 screws
(4)
that secure the top cover to the base enclosure.
4.
Turn the computer display-side up with the front toward you.
5.
Open the computer as far as possible.
6.
Release the ZIF connector to which the touchpad
(1)
is connected and disconnect the cable
from the system board.
7.
Release the ZIF connector to which the touchpad button board cable
(2)
is connected and
disconnect the cable from the system board.
8.
Disconnect the speaker cable
(3)
from the system board.
66
Chapter 4
Removal and replacement procedures
ENWW