Compaq Presario V5000 Compaq Presario V5000 Notebook PC - Maintenance and Serv - Page 131
that secure, the base enclosure to the computer.
View all Compaq Presario V5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Removal and Replacement Procedures 2. Release the ZIF connector to which the TouchPad cable 1 is connected and disconnect the TouchPad cable 2 from the system board. ✎ The TouchPad cable is included in the Cable Kit, spare part number 407775-001. 3. Remove the two Phillips PM2.5×13.0 screws 3 that secure the base enclosure to the computer. Disconnecting the TouchPad Cable and Removing the Base Enclosure Screws, Part 1 Maintenance and Service Guide 5-41
Removal and Replacement Procedures
Maintenance and Service Guide
5–41
2. Release the ZIF connector to which the TouchPad cable
1
is
connected and disconnect the TouchPad cable
2
from the
system board.
✎
The TouchPad cable is included in the Cable Kit, spare part
number 407775-001.
3. Remove the two Phillips PM2.5×13.0 screws
3
that secure
the base enclosure to the computer.
Disconnecting the TouchPad Cable and Removing the Base
Enclosure Screws, Part 1