Compaq ProLiant CL1850 Compaq ProLiant CL1850 Software User Guide - Page 49

Adding Physical Drives, to your configuration after the controller has started, follow these steps

Get Compaq ProLiant CL1850 PDF manuals and user guides View all Compaq ProLiant CL1850 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

3-18 Compaq ProLiant CL1850 Software User Guide The Cache tab (Figure 3-13) indicates the cache memory size for each occupied slot in a controller's memory. Figure 3-13. Controller Properties window, Cache tab Adding Physical Drives The system's CR3500 RAID Controllers must recognize the physical drives in the shared storage area before you can create logical drives from them. The controller will recognize all physical drives at start up. To add physical drives to your configuration after the controller has started, follow these steps: IMPORTANT: Before adding physical drives that have previously been used by another ProLiant CL1850, it is necessary to delete any configuration settings on the drives. Failure to do so can cause conflicting RAID settings on the CR3500 controller. 1. Physically add the drives to the system. 2. Run the CR3500 Configuration Utility to configure the drives. NOTE: You cannot increase the capacity of an existing logical drive.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
3-18
Compaq ProLiant CL1850 Software User Guide
The Cache tab (Figure 3-13) indicates the cache memory size for each
occupied slot in a controller’s memory.
Figure 3-13.
Controller Properties window, Cache tab
Adding Physical Drives
The system’s CR3500 RAID Controllers must recognize the physical drives in
the shared storage area before you can create logical drives from them. The
controller will recognize all physical drives at start up. To add physical drives
to your configuration after the controller has started, follow these steps:
IMPORTANT:
Before adding physical drives that have previously been used by another
ProLiant CL1850, it is necessary to delete any configuration settings on the drives. Failure
to do so can cause conflicting RAID settings on the CR3500 controller.
1.
Physically add the drives to the system.
2.
Run the CR3500 Configuration Utility to configure the drives.
NOTE:
You cannot increase the capacity of an existing logical drive.