Compaq d530 HP Compaq Business Desktop d500 Service Reference Guide, 5th Editi - Page 139
Power Switch Assembly
View all Compaq d530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Removal and Replacement Procedures- Small Form Factor (SFF) Chassis 7.12 Power Switch Assembly 1. Prepare the computer for disassembly (Section 7.1, "Preparation for Disassembly"). 2. Remove the computer access panel (Section 7.5, "Computer Access Panel"). 3. Disconnect the power switch/LED cable from the system board. 4. Carefully cut the cable tie that secures the power switch cable to the power supply cable cable bundle. Ä CAUTION: Be careful when cutting the cable tie not to cut any cables. 5. Squeeze the switch holder retaining clips together at the front of the chassis 1 and push the switch assembly out of the chassis 2. To install the power switch assembly, reverse the removal procedure. Service Reference Guide, d500 336492-005 7-25
Service Reference Guide, d500
336492-005
7–25
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.12 Power Switch Assembly
1. Prepare the computer for disassembly (
Section 7.1, “Preparation for Disassembly”
).
2. Remove the computer access panel (
Section 7.5, “Computer Access Panel”
).
3. Disconnect the power switch/LED cable from the system board.
4. Carefully cut the cable tie that secures the power switch cable to the power supply cable
cable bundle.
Ä
CAUTION:
Be careful when cutting the cable tie not to cut any cables.
5. Squeeze the switch holder retaining clips together at the front of the chassis
1
and push the
switch assembly out of the chassis
2
.
To install the power switch assembly, reverse the removal procedure.