Compaq d530 HP Compaq Business Desktop d500 Service Reference Guide, 5th Editi - Page 93
use M3 metric screws. The HP-supplied metric screws are black. The HP-supplied standard - cmt specification
View all Compaq d530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Removal and Replacement Procedures- Convertible Minitower (CMT) Chassis 8. In the minitower mode, pull up on the green drivelock mechanism 1 for that specific drive and slide the drive from the drive bay 2. 9. Remove the four guide screws (two on each side) from the old drive and install them in the lower set of holes on the optical drive. ✎ Extra guide screws are provided on the chassis on the side of the fourth drive bay. Optical drives use M3 metric screws. The HP-supplied metric screws are black. The HP-supplied standard screws are silver. Service Reference Guide, d500 336492-005 6-21
Service Reference Guide, d500
336492-005
6–21
Removal and Replacement Procedures— Convertible Minitower (CMT) Chassis
8. In the minitower mode, pull up on the green drivelock mechanism
1
for that specific drive
and slide the drive from the drive bay
2
.
9. Remove the four guide screws (two on each side) from the old drive and install them in the
lower set of holes on the optical drive.
✎
Extra guide screws are provided on the chassis on the side of the fourth drive bay. Optical drives
use M3 metric screws. The HP-supplied metric screws are black. The HP-supplied standard
screws are silver.