Compaq nc6000 Software Guide - Page 45
Setting System Information Options, Using the Smart Card Reader - base system driver
View all Compaq nc6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Security Setting System Information Options 1. To open Computer Setup, turn on or restart the notebook. Press f10 while the F10 = ROM Based Setup message is displayed in the lower left of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 2. Access or set your preferences by following these directions: ❏ To view general system information, select the File menu > System Information. ❏ To view or enter identification values for system components, select the Security menu > System IDs. 3. To confirm the information or your preferences, press f10. 4. To save your information or preferences, use the arrow keys to select File > Save Changes and Exit, then follow the instructions on the screen. Your preferences are set when you exit Computer Setup and take effect when the notebook restarts. Using the Smart Card Reader Select notebooks models are equipped with an embedded Smart Card Reader. On these models, the driver for your Smart Card Reader is preinstalled. No action is necessary to install the driver. The Smart Card Reader is used with industry-standard Smart Cards designed to work with Windows 2000 and Windows XP Professional operating systems. 3-16 Software Guide