Craftsman 17540 Operation Manual - Page 21

TOGGLE "ON/OFF" SWITCH (FIg_ 9) Your router motor is turned "ON _ end "OFF by the toggle switch located on the lop cap of the motor housing The taft side of the toggle switch hood (as you face it) is marked 'T' for "On" end the right side (as you face i_) is marked "O" for "OFF. TO TURN THE MOTOR "ON", Push the toggle switch to the left side marked "F, or"On" TO TURN THE MOTOR "OFF" Push the toggle switch to the r_ght side marked "O", or "OfF Always hold the route rand cutter bit away lmm the workplacewhen turning the toggte switch "On" Only conlact the workplecewith the rouler and cutter bit afler the muter has reached fail speed ONLY remove the routerand cutler bit from the workpieceAFTER turningtherouter meter "OFF', and the cutterblt comes to a comptete stop Rgog Operating in this manner witl increaseloggia switch and meter Iite, and will increase t the qualityof your work SOFT START FEATURE Electronic feedback control minimizes torque twist, customaryIn larger muter motors, by limiting the speed at which the motor starts This Increases the motor's life LED WORKLIGHTS (Fig. 10) Your router motor has 3 buitt-in worktlghtslocated around thetoilet/nut to provide high visibilityof workpiecewhen cutting.These lights are always "On" when the teggte ew{leh is In the "On "poeftlon "LIVE TOOL INDICATOR" LIGHT (Fig. 11) Your router else has a "LIVE TOOL INDICATOR_ green tIght. Ioceled on the reeler housing top cap where the power cord enters the motor housing, Thls green light is always on when router motor is plugged into powersource 21