Cub Cadet HT59L HT59L Operator's Manual

Cub Cadet HT59L Manual

Cub Cadet HT59L manual content summary:

  • Cub Cadet HT59L | HT59L Operator's Manual - Page 1
    -Powered Hedge Trimmer HT59L TABLE OF CONTENTS Service Information 1 Safety Information 1 Know Your Unit 2 Assembly Instructions 2 Starting and Stopping Instructions 2 Operating Instructions 3 Maintenance and Repair Instructions 3 Cleaning and Storage 3 Troubleshooting 3 Specifications
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 2
    not attempt to repair; there are no user serviceable parts inside. • Follow all maintenance instructions in this manual. • Before inspecting, servicing, cleaning, storing, transporting or replacing any parts on the unit: 1. Make sure all moving parts have stopped. 2. Allow the unit to cool. 3. Make
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 3
    at any time without notice. ACCESSORIES (SOLD SEPARATELY) Model # Part # Description A59 LBTY 753-06579 20V Lithium-ion Battery A59LCHGR 753-06580 20V Lithium-ion Battery Charger MAINTENANCE AND REPAIR INSTRUCTIONS WARNING: Before inspecting, cleaning, or servicing the unit, stop the
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 4
    NOTES 4
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 5
    lithium-ion, 20 Volts HT59L TABLE DES MATIÈRES Informations sur l'entretien et le service après-vente 5 Informations sur la sécurit 5 Familiarisez-vous avec votre outil 6 Instructions de montage 6 Instructions de démarrage et d'arrêt 6 Instructions d'utilisation 7 Entretien et réparations
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 6
    maximum d'un demi pouce (12,7 mm). AUCUN OUTIL NÉCESSAIRE ! Tige de support de lame Écran de sécurité de la poignée avant Poignée avant la tête (Fig. 2) et retirez le fourreau de la lame de coupe. INSTRUCTIONS DE DÉMARRAGE ET D'ARRÊT DÉMARRER LE MOTEUR Pour éviter les démarrages accidentels
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 7
    réglages mentionnés ci-dessus, veuillez appeler le service à la clientèle au 1-877-282-8684 le produit à l'impression de ce guide. Nous nous réservons le droit PARÉMENT) Model # Part # Description A59 LBTY 753 la batterie. Le non respect de ces instructions peut entraîner des dégâts matériels
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 8
    REMARQUES 8
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 9
    Manual del Operador Recortadora de setos alimentada con batería de ión de litio de 20 Voltios HT59L TABLA DE CONTENIDO Información sobre servicio 9 Información sobre seguridad 9 Conozca su unidad 10 Instrucciones de ensamblaje 10 Instrucciones de Arranque y Parada 10 Instrucciones de operación
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 10
    de continuar la operación. • Cuando el motor esté funcionando, mantenga todas las partes del cuerpo alejadas de la cuchilla de corte. Antes de arrancar la unidad, NO realice trabajos de mantenimiento que no sean los descritos en este manual. No trate de repararla; la unidad no tiene piezas dentro
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 11
    a la cuchilla. FUNDAMENTOS DE MANTENIMIENTO Antes de inspeccionar, dar mantenimiento, limpiar, guardar o transportar la unidad: 1. Asegúrese de que todas las partes en movimiento se hayan detenido. 2. Deje que el motor se enfríe. 3. Quite la batería. AFILAR LA CUCHILLA Las cuchillas de corte est
  • Cub Cadet HT59L | HT59L Operator's Manual - Page 12
    accessory or attachment not approved by Cub Cadet LLC for use with the product(s) covered by this manual will void your warranty as to any resulting damage. HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF OF PURCHASE THROUGH YOUR LOCAL AUTHORIZED SERVICE DEALER. To locate the dealer
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12

IMPORTANT SAFETY INSTRUCTIONS
769-06500 P01
01/11
Operator’s Manual
20 Volt Lithium-Ion
Battery-Powered Hedge Trimmer
HT59L
TABLE OF CONTENTS
Service Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Starting and Stopping Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Operating Instructions
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Maintenance and Repair Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Troubleshooting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Warranty Information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF PURCHASE WILL BE REQUIRED FOR
WARRANTY SERVICE.
For assistance regarding the assembly, controls, operation or maintenance of the unit, please call the
Customer Support Department. Additional information about the unit can be found on our website.
Please call the Customer Support Department for replacement parts. When servicing, use only identical
replacement parts.
DO NOT RETURN THIS
PRODUCT
Please call the Customer Support Department
or visit our website for assistance:
or
SAFETY INFORMATION
SAVE THESE INSTRUCTIONS
All information, illustrations and specifications in this manual are based on the latest product information
available at the time of printing. We reserve the right to make changes at any time without notice.
Copyright© 2011 MTD SOUTHWEST INC, All Rights Reserved.
Use 20V Lithium-Ion Battery A59 LBTY (sold separately)
Use 20V Lithium-Ion Battery Charger A59LCHGR (sold separately)
SERVICE INFORMATION
PRELIMINARY SAFETY PRECAUTIONS
DO NOT
rely exclusively upon the safety devices built into the unit.
Keep bystanders, especially children and pets, at least 50 feet (15 m) away. If anyone enters the
work area, stop the unit!
Keep the work area clean. Cluttered areas invite injuries. Do not start the operation until the work area is
clear and free from obstructions and there is secure footing.
Always wear appropriate eye and ear protection when operating this unit. Wear safety goggles, or
safety glasses with side shields, that are marked as meeting ANSI Z87.1-1989 standards. Failure to
do so could result in serious eye injury caused by thrown objects. If the operation is dusty, wear a
facemask or dust mask.
Dress appropriately, wear heavy, snug-fitting clothes (long pants and a long sleeve shirt), non-slip
protective gloves and boots. Do not wear loose clothing, jewelry, short pants, sandals or go
barefoot. Secure hair above shoulder level to prevent entanglement in moving parts.
Only use the unit in daylight or good artificial light.
Only use the unit for the purpose intended.
HEDGE TRIMMER SPECIFIC SAFETY PRECAUTIONS
DO NOT
over reach.
DO NOT
cut above shoulder height.
Inspect the work area before using the unit. Remove any hard and/or sharp objects, such as glass, wire,
etc. If thrown or caught in the trimmer blade, such objects could cause property damage or injury to the
operator or bystanders.
Grip the unit firmly with both hands when the motor is running. Keep the left hand on the front handle and
the right hand on the rear handle. Use a firm grip with thumbs and fingers encircling the handles. Stand
slightly to the left of the unit to avoid being in the direct line of the trimmer blade. Follow all instructions in
the
Operating Instructions
section.
Never grip the unit by the guard or use the guard as a handle.
Always begin a cut with the motor running at full speed. Fully squeeze the switch trigger and maintain a
steady cutting speed.
Follow the manufacturer’s sharpening and maintenance instructions for the trimmer blade.
OTHER SAFETY PRECAUTIONS
DO NOT
operate the unit with one hand! Serious injury to the operator, helpers or bystanders may result
from one-handed operation. This unit is intended for two-handed use.
DO NOT
handle the unit with wet hands.
DO NOT
operate the unit on unstable surfaces, such as trees, ladders, slopes or rooftops. Be very
careful when using the unit on stairs.
DO NOT
expose the unit to rain. Do not use the unit in damp or wet locations or conditions.
DO NOT
operate the unit on wet surfaces.
DO NOT
use the unit in the presence of flammable liquids or gases.
DO NOT
operate a unit that is damaged, improperly adjusted or not completely and securely assembled.
Be sure that the unit stops when the trigger is released. Do not use the unit if the switch does not turn the
unit on and off properly or if the switch lock does not work.
DO NOT
attempt operations beyond the operator’s capacity or experience.
DO NOT
cut near electrical cables or power lines.
DO NOT
force the unit. It will do a better, safer job when used at the intended rate.
To reduce the risk of electric shock, avoid body contact with grounded conductors, such as metal pipes
or wire fences.
Keep proper footing and balance at all times.
Use extreme caution when reversing or pulling the unit back toward the operator.
If the unit produces excessive vibration, stop the motor immediately. Inspect the unit for loose
screws, bolts, nuts, etc. or damaged parts. Tighten or replace any loose or damaged parts before
resuming operation.
Keep all body parts away from the trimmer blade when the motor is operating. Before starting the unit,
make sure the trimmer blade is not contacting anything.
READ ALL INSTRUCTIONS BEFORE OPERATING
SAFETY BASICS
Carefully read and understand the operator's manual of the battery that powers this unit.
Be thoroughly familiar with the controls and the proper use of the unit. Know how to stop the unit and
disengage the controls quickly.
Stay alert! Do not operate the unit when tired, ill or under the influence of alcohol, drugs or medication.
Never allow children to operate the unit. Never allow adults to operate the unit without proper instruction.
Do not allow the unit to be used as a toy.
Make sure that all guards and safety attachments are properly installed before operating the unit.
Keep these instructions. Refer to them often and use them to instruct other users. If loaning someone this
unit, also loan them these instructions.
WARNING:
Please read the entire operator’s manual carefully before
attempting to assemble, operate or maintain the unit. Follow all safety instructions. Failure
to do so can result in property damage or serious injury to yourself and/or others.
U.S.
1-877-282-8684
www.cubcadet.com
Canada
1-800-668-1238
www.cubcadet.ca
CALIFORNIA PROPOSITION 65
WARNING:
Battery posts, terminals and certain finished components contain
lead, lead compounds and chemicals known to the State of California to cause cancer and
birth defects or other reproductive harm. Wash hands after handling.
DANGER:
Signals an EXTREME hazard.
Failure to obey a safety
DANGER
signal
WILL
result in serious injury or death to yourself or
to others.
WARNING:
Signals a SERIOUS hazard.
Failure to obey a safety
WARNING
signal
CAN
result in serious injury to yourself or to others.
CAUTION:
Signals a MODERATE hazard.
Failure to obey a safety
CAUTION
signal
MAY
result in property damage or injury to
yourself or to others.
IMPORTANT!
Signals special mechanical information.
NOTE:
Signals additional important general information.
SYMBOL
MEANING
• SAFETY ALERT SYMBOLS •
Safety alert symbols are used to draw your attention to possible dangers. These symbols, and their
explanations, deserve your careful attention and understanding. The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not substitutes for
proper accident prevention measures. These safety instructions are not meant to cover every
possible condition that may occur. If questions arise, please call the Customer Support
Department at
1-877-282-8684
(U.S.) or
1-800-668-1238
(Canada).