Cub Cadet RZT L 34 Operation Manual - Page 13

2. Remove the foam pre-filter from around the paper air 5. Attach the air filter cover, making sure to align thumb filter. See Figure 6-6. Replace paper element when dirty or screws and plastic rib features on the shroud to the plastic damaged. Clean foam element or replace when damaged. features on the air filter cover. See Figure 6-8. Turn thumb screws clockwise until snug. Check for any misalignment. Air Filter Cover Plastic Feature Air Filter Pre-Filter Shroud Plastic Rib Figure 6-6 Feature 3. To clean foam element, wash in a mild liquid detergent and Figure 6-8 water. Squeeze or press the foam element to rinse out dirt and water. Do not twist; this could damage or tear the foam Spark Plug Service element. Allow to dry thoroughly before using. DO NOT oil the foam element. WARNING: DO NOT check for spark with spark plug removed. DO NOT crank engine with spark 4. Attach the new air filter with foam element, aligning the plug removed. hole in the air filter with the intake manifold. See Figure 6-7. Secure with thumb screw. To ensure proper engine operation, the spark plug must be properly gapped and free of deposits. 1. Remove the spark plug boot and use a spark plug wrench to remove the plug. See Figure 6-9. Spark Plug Figure 6-7 Intake Manifold Spark Plug Boot Figure 6-9 Section 6 - Maintenance 13